Item # Dykor 204/205/202, Dykor 204/205/202 on Coating Systems, Inc.

Coating Systems, Inc. - Item # Dykor 204/205/202, Dykor 204/205/202

Home | About Us | Capabilities | Online Catalog | Contact Us | Request for Quote


Products & Services
::	Dry Film Lubrication
::	Chemical Coating Processing
::	Military Specification Coatings
::	Coatings for Seals, O-Rings and Gaskets
::	Custom Coatings
::	Fluoropolymer Coatings
::	Teflon Coatings


All Categories > Teflon Coatings > Whitford > Item # Dykor 204/205/202

Request Information

crosschannel_bgcc0000e

Item # Dykor 204/205/202 Dykor 204/205/202

Whitford Xylan Coatings have several specific series of coatings, described here:

1000	Solvent & Water	Premium dry-film lubricant, with widely varying properties; hard, heat stable, excellent broadband corrosion barrier; flexible cure schedule; can be formulated to have good release; electrical conductivity; fair UV stability.	Sliding mechanisms, bearings, large fasteners, power screws, valves, machine parts, pistons.
1200	Water	Good friction and release at low cost; good UV stability and outdoor weathering characteristics.	Saw blades, cutting implements, small fasteners, stampings.
1300	Water	Excellent abrasion and chemical resistance, primarily for ferrous substrates; must be cured above 375°C/700°F. Hot hardness not as good as 1000 Series. Good UV stability.	Pump components, slurry impellers, valve bodies, molds.
1400	Water	Excellent chemical resistance, particularly to bases. Good UV stability.	Large fasteners, automotive components.
1500	Solvent	Highly colorful, comes in many colors (primarily decorative, with good release). Resists household chemicals. Excellent UV characteristics.	Decorative parts for automotive and appliances, plastic valves, personal care products.
1600	Solvent & Water	Tough, with good hot hardness. Provides primary and secondary lubrication.	Automotive engine pumps and compressor applications: journal bearings, wrist pins, piston skirts.
1700	Water	High release, good toughness, good film build to achieve greater abrasion resistance and better barrier properties.	Copy rollers, immersion heaters, heat-sealing bars, CPI vessels.
1800	Solvent & Water	Maximum nonstick (release) properties; perfoms well on parts that are post-formed	Molds and other components that require best release; sheet metal parts that are deep drawn or stamped.
2000	Solvent & Water	Low friction, abrasion resistant coatings which exhibit high flexibility. Wide color & texture range available.	Rubber sealing systems, particularly automotive.
5200	Solvent & Water	Formulated for dip/spin and other bulk application techniques; outstanding corrosion protection from salt spray and acid rain. Wide selection of colors	Fasteners and other small parts that need as much as 1000 hours of salt fog protection and/or must endure up to at least 30 cycles in Kesternich test.

Specifications

Resin		Yes

Cure		5 Min. @ 290ºC (555ºF)

Color (Cured)		Black

Service Temperature		-60 to 200 ºC -76 to 390 ºF

Salt Spray Resistance		Yes

Solvent Resistance		High

Substrates		Metal, Glass, Ceramics

Application		Spray

Print

Printable Page

Email

Email This Page

Save To Favorites

Save To Favorites

Request Information